Reymerink Alcohol 80%

Reymerink Alcohol 80%
Reymerink Alcohol 80% SPRAY

The product is a ready-to-use liquid that must be used undiluted

Skin disinfection
The product is only intended for disinfection of permanently intact skin, i.e. skin that will not be opened or pierced after disinfection. First clean the skin to be disinfected and dry it well. Apply the product to the skin to be treated with, for example, a cellulose swab. Apply so much of the product that the treated skin remains moist during the entire exposure time (at least 30 seconds). Then let the skin dry. Minimum processing time: 30 seconds. Hard surface disinfection Only apply the product to small surfaces (maximum 0.5 m2). Clean surfaces to be treated first. Rinse off any cleaning agent used with clean water. Remove excess water. Apply the product with a cloth or wad of cotton wool to the surface to be treated and let it work for +/- 5 minutes. When disinfecting, use so much liquid that the surface remains wet during the entire exposure time. Then rub the surface dry with, for example, a cellulose cloth. exposure time: +/- 5 minutes

Disinfection of instruments by dipping

Clean the materials first. Rinse off any cleaning agent used with clean water. Remove excess water. Subsequently, immerse the materials completely in Alcohol podior 80% for +/- 5 minutes. Then remove the materials from the disinfectant with clean gloves and let them dry in a clean place.

Admission number: 14331N